Please install it first skype
Link:
Deformation
Title
Time
  • How

    Measures the expansion of the rim bead when under pressure from an inflated tire.


    Three separate steps:


    1.  Security test: Measure the rim with an inflated tire (145psi) at three points, and let sit for 24 hours. Deflate the tire and measure again: measurements should be the same.


        2. Deformation test: Measure the rim width at the spoke holes. Inflate the tire to 130psi. After 10 minutes check the rim width again at the same points. At least three points should have less than .05mm of deformation.


        3. Blowout: Inflate a tire to 102psi, then pause 60 seconds and listen for noise. Inflate by 7.5psi more and repeat. There should be no noise until 170 psi. Noise is ok until 170 psi but no blowout or breakage is acceptable.


    This test ensures that rim beads can handle well above the maximum inflation levels for road tires.


    2018 - 10 - 25
  • What
    2018 - 10 - 25
  • Why
    2018 - 10 - 25
More
Customer Service: info@bola-bicycle.com
Warranty: admin@bola-bicycle.com
tel/fax:0086 592 6537519
Whatsapp : 008618059256592
Xiamen, Fujian, China, 361000
direct message
  • 您的姓名:
  • *
  • 电话:
  • *
  • 留言主题:
  • *
     
Copyright ©2018~2023 Xiamen Bola sporting goods Co., Ltd.
犀牛云提供云计算服务